SST X Passive Heatsink

Predrilled Heatsink for COB LED

SST X Pin Heatsink

Looking for a pre assembled lamp with SSTX. Checkout Timber Grow Lights

New flared design for better cooling.

 

SST X Heatsink provides 80 to 100 Watts passive cooling for Bridgelux Vero 29 COB, Vero 29SE, Citizen CLU048xx, CLU048-1818, Zhaga 3, 35mm.

Recommended current 1.75 Amps to 2.8 Amps for 36V- 40V COB LED, 1-4A to 2.1 A for 50V-54V COB LED and 1A to 1.4 A for 70V COB LED.

 

Includes

  • 4 pcs or 8pcs Heatsinks per box. Pre drilled and tapping for Bridgelux Vero 29 or 35mm for Cree CXB/CXA 3070, Citizen CLU048, V22, Vero 13, Vero 18
  • Not compatible with Cree CXB/CXA 3590
  • Includes M3x6mm screws for mounting COB and M4x10mm screws for mounting heatsink

Optics

  • SST X is Pre drilled LEDiL Angelina Reflectors.
  • KB-HB100-80 100mm glass lens is compatible with heatsinks. Verify that the diagonal mounting positions 112mm before buying the lens.

Why design with Pin Heatsinks

Pin heatsink have a unique pin geometry that uses surrounding air streams for a very effective cooling. The round, aerodynamic pin design reduces resistance to surrounding air streams that enter the pin array, while simultaneously increasing air turbulence. The omnidirectional pin configuration allows air to enter and exit the heat sink in any direction and exposes the heat sink to the fastest possible air speed. The superior airflow and the high emissivity of the anodized heatsink surface allows Pin heatsink to offer an exceptional  cooling for your COB LED. Compared to other undersized Pin Heatsinks, our large pin heatsinks are rated to provide better cooling and ensure reliable LED operation and minimum Light Loss over time.


Compatible with Bridgelux Vero 29 COB

  • Pre drilled for Bridgelux Vero 29 (not included)
  • Pre drilled for reflector adapter LEDiL C13584_CLAMP-VERO29 and LEDiL F13838_ANGELINA-XW (not included)
  • Pre drilled 100mm Glass lens or Khatod Silicone Lens.  (not included)
  • 4x M3 screw positions on outer perimeter and 2x M4  screw positions on sides for mounting heatsink

Compatible with Citizen CLU-048 COB

  • Pre drilled for Citizen CLU-048 with Ideal Holder 50-2204CT (not included)
  • Pre drilled for reflector adapter 50-2100AN and LEDiL F13838_ANGELINA-XW (not included)
  • Pre drilled for Citizen CLU-048 with BJB Holder 47.319.2030.50, 47.319.2033.50, 47.319.2314.50, 47.319.2315.50 and reflector F13839_ANGELINA-XW(not included)
  • Pre drilled 100mm Glass lens or Khatod Silicone Lens.  (not included)
  • 4x M3 screw positions on outer perimeter and 2x M4  screw positions on sides for mounting heatsink

 

Note: COB LED, Driver, COB holder and Reflector is not included. Pins may bend during shipping. Please pull them back in position with a string. Contact us if you see any excessive shipping damage.

 

Specifications*

Side 125 mm
Base 10 mm
Height
Weight 820 grams
Recommended Watts** 80W to 100W Led or 60W Heat
Thermal Resistance** 0.60 C/W
Material Black Anodized Aluminum 1070

 *Specifications are subject to change without notice.
**Reference values measured in 0 LFM Airspeed. Thermal resistance will be lower in an environment with airflow. Actual measurement is recommended each application.

 

Notes:

  • COB LED, Driver, COB holder and Reflector is not included.
  • Pins may bend during shipping. Please pull them back in position with a string. Contact us if you see any excessive shipping damage.
  • Align Ideal holder before installation to make sure reflector adapter.
  • Heatsink/Optics  mounting positions highlighted in center.

Allign Ideal COB Holder

 

 

 


Collections: ALL, LED Components

Category: COB DIY, DIY, Heatsink

Type: DIY Kits


Related Items