SST105 Passive Heatsink

CLU048, CXA/CXB 3070/Zhaga 3, 35mm

29 items left

 

The SST105 Heatsink provides 25 to 35 Watts passive cooling for  Cree CXA/CXB 3070, Citizen CLU048-1212,CLU048-1812, CLU048-1818, Vero 18, Vero 13, Zhaga 3, 35mm. Recommended max current 1050 mA for 36V-40V Cobs and 700mA for 52V  Cobs.

Includes

  • 1pcs Heatsinks. Pre drilled and tapping for 35mm compatible COBs Cree CXA/CXB 3070 and Citizen CLU048
  • Includes M3x6mm screws for mounting COB and M3x12mm screws for mounting heatsink

Optics

  • SST 105 is Pre drilled for LEDiL Angelina Reflectors.

Why design with Pin Heatsinks

Pin heatsink have a unique pin geometry that uses surrounding air streams for a very effective cooling. The round, aerodynamic pin design reduces resistance to surrounding air streams that enter the pin array, while simultaneously increasing air turbulence. The omnidirectional pin configuration allows air to enter and exit the heat sink in any direction and exposes the heat sink to the fastest possible air speed. The superior airflow and the high emissivity of the anodized heatsink surface allows Pin heatsink to offer an exceptional  cooling for your COB LED. Compared to other undersized Pin Heatsinks, our large pin heatsinks are rated to provide better cooling and ensure reliable LED operation and minimum Light Loss over time.

Compatible with Citizen CLU-048 COB

  • Pre drilled for Citizen CLU-048 with Ideal Holder 50-2204CT (not included)
  • Pre drilled for reflector adapter 50-2100AN and LEDiL F13838_ANGELINA-XW (not included)
  • Pre drilled for Citizen CLU-048 with BJB Holder 47.319.2030.50, 47.319.2033.50, 47.319.2314.50, 47.319.2315.50 and reflector F13839_ANGELINA-XW(not included)
  • 4x M3 screw positions on outer perimeter for mounting heatsink

Compatible with Cree CXB 3070 COB

  • Pre drilled for Cree CXB 3070 with Ideal Holder 50-2234C (not included)
  • Pre drilled for reflector adapter 50-2100AN and LEDiL F13838_ANGELINA-XW (not included)
  • Pre drilled for Cree CXB 3590 with BJB Holder 47.319.2150, 47.319.2154, 47.319.2155 and reflector F13839_ANGELINA-XW(not included)
  • 4x M3 screw positions on outer perimeter for mounting heatsink

Other Compatible COBs

  • Bridgelux V22 with Ideal Holder 50-2204CT, reflector adapter 50-2100AN and LEDiL F13838_ANGELINA-XW
  • Bridgelux Vero 18, Vero 13
  • NICHIA NFDxJ130B, NFCxJ108B-V1 with Ideal Holder 50-2103NC, reflector adapter 50-2100AN and LEDiL F13838_ANGELINA-XW
  • All ideal COB holders with 35mm screw spacing listed here and here.

Note: COB LED, Driver, COB holder and Reflector is not included. Pins may bend during shipping. Please pull them back in position with a string. Contact us if you see any excessive shipping damage.



Specifications*

Diameter 105 mm
Base 10 mm
Height 10 mm + 50mm
Weight 350grams
Recommended Watts** 25W to 35W Led or 20W Heat
Thermal Resistance** 1.2 C/W
Material Black Anodized Aluminum 1070

 *Specifications are subject to change without notice.
**Reference values measured in 0 LFM Airspeed. Thermal resistance will be lower in an environment with airflow. Actual measurement is recommended each application.

 

Notes:

  • COB LED, Driver, COB holder and Reflector is not included.
  • Pins may bend during shipping. Please pull them back in position with a string. Contact us if you see any excessive shipping damage.
  • Align Ideal holder before installation to make sure reflector adapter.
  • Heatsink/Optics  mounting positions highlighted in center.

Allign Ideal COB Holder

 

 

 


Collections: ALL, LED Components

Category: COB DIY, DIY, Heatsink

Type: DIY Kits


Related Items