Osram Optotronic 600W LED Driver
The Osram Optotronic 600W driver is a high-efficiency replacement or DIY power solution designed to run four compatible HLG Quantum Boards per driver.
This driver is suitable for use with:
-
(4) QB288 Rspec Quantum Boards
-
(4) QB288 Bspec Quantum Boards
-
(4) QB648 Diablo Quantum Boards
When paired correctly, this driver configuration is compatible with fixtures such as the HLG 600 Rspec, HLG 600 Bspec, and HLG 650 Diablo.
*Please note, if purchasing this power supply for a DIY 600 kit, this driver would require re-wiring your boards to Series Parallel
Ideal For:
-
DIY builds
-
Replacement driver projects
-
Custom fixture configurations
Engineered for reliable output and consistent performance, the Osram Optotronic 600W driver delivers the power needed to operate four HLG Quantum Boards in a properly configured system.
Driver datasheet available here.
General Information
|
Item Number |
57341 |
|
Type |
Constant Current |
|
Output Power |
600W (Max.) |
|
Programming Tool |
57568 |
|
Programmable Features |
Output Current Dim-to-Off AstroDIM Thermal Protection Constant Lumen Output |
Environmental Specifications
|
Ambient Operating Temperature |
-40ºC to 55ºC |
|
Case Temperature (Tc) |
90ºC (max) 75ºC (Warranty) |
|
Max. Storage Temp |
-40ºC to 85ºC |
|
Max. Relative Humidity (%) |
95% |
|
Surge Protection |
5KV line-line 10KV line-earth |
|
IP Rating |
IP67 |
|
UL Rating |
Dry, Damp, & Wet |
|
UL File number |
E320395 |
|
EMI Compliance – CCC |
GB/T 17743 GB 17625.1 |
|
EMI Compliance – CE |
EN 55015 EN 61000-3-2 EN 61000-3-3 EN 61000-4-2,3,4,5,6,11 |
Electrical Specifications
Input
|
Input Voltage (VAC) |
120V-277V (+/- 10%)1 |
|
|
Frequency Range (Hz) |
50 – 60 Hz (+/- 10%) |
|
|
Input Current (A) |
4.5A Max. |
|
|
Inrush Current (Apk) @ 230V |
75A |
|
|
|
120V |
277V |
|
Efficiency @ Full load |
91% |
93% |
|
THD @ Full Load |
<10% |
<15% |
|
Power Factor @ Full Load |
>0.97 |
>0.90 |
1 - Driver rated for 100-277Vac
Output
|
Output Current (mA) |
2800 - 5600 mA (Default: 5600 mA) |
|
Output Voltage (VDC) |
54 - 134 VDC |
|
Output Ripple Current |
< 10% |
|
Max. Output Power (W) |
600W |
|
LED Power-Up Time |
< 1sec Max. < 0.5sec Typical |
|
Load Regulation |
+/-3% |
|
Line Regulation |
+/-1% |
|
Over Voltage Protection |
Yes, non-latching |
|
Output Short-Circuit |
Yes, non-latching |
|
Over Temperature Protection |
Yes, non-latching |
Dimming
|
Dimming Control |
0 – 10V |
|
Dimming Range |
10-100% |
|
Dimming Type |
Pulse-Width Modulation |
|
Source/Sink Current |
0.4mA Max. |
|
Dim-to-Off OFF/ON Threshold |
0.5V/0.7V |
|
Dim-to-Off Standby Power |
< 0.5W |
Auxiliary Output
|
Output Voltage (Vdc) |
12V |
|
Output Power (W) |
3.6W Max |
|
Voltage Regulation |
+/- 10% |
All domestic orders ship in 1-4 business days. International orders ship in 5-10 business days.
