ALL
HLG 550 V2 Rspec
Ideal for Flowering/Full Cycle
Sold Out
Our HLG550 V2 Rspec Commercial Indoor Horticulture LED grow light is designed to replace a single-ended 1000watt HID. Each HLG-550 V2 uses 4 of our custom designed full-spectrum high efficiency white light quantum boards with Samsung LM301B and Deep Red LED 660nm . Learn more about the individual QB-288 boards here. This unit is dimmable, with wattage output from 200 to 480 watts.
HLG-550 V2 Independent Lab Test Report 1
Watts to BTU Calculator, Cooling Requirement Calculator
Top Features
- High efficiency white light quantum boards
- Full-spectrum White and 660nm Red
- Reliable passive-cooled design
- Better canopy light penetration with diffused light
- Dimmable power supply included
- Auto sensing power supply works on both 120VAC and 240VAC and 277VAC
- 3-year warranty
- Higher intensity and more even coverage in a grow tent, reflective area, or by crossing over using multiple HLG-550 V2 lamps.
Specifications
| Power | 240-480 Watts |
| Voltage Range | 90-277 VAC |
| LED | Samsung LM301B & Deep Red |
| Flowering Footprint | 4.5' x 4.5' or 4' x 5' at 24' |
| Veg Footprint | 6' x 6' at 36” |
| System Efficiency | 168 Lm/W |
| System PPF Efficacy | 2.6 μmol/joule |
| Total output | 1257 PPF |
| Dimensions | 26"X20"x3" |
| Recommended Mounting Height | 24-32 inches above canopy |
Conforms to UL Std 1598
Certified to CSA Std C22.2#250.0
Please contact for other spectrum options, 240V or UK, EU Power cords.
Datasheet of Samsung LM301B Datasheet used in R spec Quantum Board ®
Expect higher intensity and more even coverage in a tent, reflective area or a cross over with multiple lamps.
View full product details
HLG 550 V2
Sold Out
Please use new HLG 550 V2 R spec for flowering and full cycle.
Our HLG550 V2 Commercial Indoor Horticulture LED grow light is designed to replace a single-ended 1000watt HID. Each HLG-550 V2 uses 4 of our custom designed full-spectrum high efficiency white light quantum boards with LM301B top-bin Samsung LED diodes. Learn more about the individual QB-288 boards here. This unit is dimmable, with wattage output from 200 to 480 watts.
HLG-550 V2 Independent Lab Test Report 1Top Features
- High efficiency white light quantum boards
- Full-spectrum for better results
- Reliable passive-cooled design
- Better canopy light penetration with diffused light
- Ideal for vegging only (4000K)
- Dimmable power supply included
- Auto sensing power supply works on both 120VAC and 240VAC
- 3-year warranty
- Higher intensity and more even coverage in a grow tent, reflective area, or by crossing over using multiple HLG-550 V2 lamps.
Specifications
| Power | 240-480 Watts |
| Voltage Range | 90-277 VAC |
| LED | 1152 pcs Samsung 301B |
| Flowering Footprint | R spec |
| Veg Footprint | 6' x 6' at 36” |
| System Efficiency | 171 Lm/W |
| System PPF Efficacy | 2.5 μmol/joule |
| Total output | 1178.05 PPF |
| Dimensions | 26"X20"x3" |
| Recommended Mounting Height | 22-32 inches above canopy |
Conforms to UL Std 1598
Certified to CSA Std C22.2#250.0
Please contact for other spectrum options, 240V or UK, EU Power cords.
Coming soon PPFD Chart in 4x4 Tent.
Coming soon PPFD Chart in 4x4 Open Space.
Expect higher intensity and more even coverage in a tent, reflective area or a cross over with multiple lamps.
View full product details
Refurbished HLG 550
Sold Out
1 year warranty
Refurbished HLG 550
Top Features
- High efficiency white light Quantum Boards
- White Light Full Spectrum for better results
- Reliable passive cooled design
- Better canopy light penetration with diffused light
- Ideal for veg and bloom
- Dimmable Power Supply included
View full product details
ELITE 360 ECO
$449.00 $499.00
HLG ELITE is 370W LED lamp is powered with our custom designed high efficiency Full Spectrum White LED with boosted Red and Deep Red LED. Designed for greenhouse and indoor horticulture. Elite 360 is an upgrade to 315W CMH or a equivalent to 600W HPS.
Goniophotometer Test Report with waterproof cover on LED
Goniophotometer Test Report without waterproof cover on LED
Top Features
- High efficiency White led with 660nm Deep Red and 630nm Red
- Reliable Passive Cooled Design
- Full Spectrum for better results
- Waterproof lens cover included
- Ideal for Veg and Bloom
- Driver with 12V DC Aux
- 1 Year Warranty
- Designed and made in USA
Specifications
| Power | 360 Watts |
| Voltage Range | 120-277 VAC |
| LED | White + Red + Deep Red |
| Flowering Footprint | 3'X3' or 2'X4' |
| Veg Footprint | 4'X4' |
| System PPF Efficacy | 2.04 μmol/joule |
| System PPF Efficacy (without cover) | 2.20 μmol/joule |
| Total output | 754 PPF |
| Total output (without cover) | 810 PPF |
| Weight | 12.5 lbs |
| Dimensions | 26"X6"x4" |
Standard Spectrum
Full spectrum White with boosted Red for excellent results in both Veg and Bloom
View full product details
HLG 100 V2
$149.00
HLG 100 V2 uses our custom designed High efficiency white light Quantum Boards. With a total of 192 pcs Samsung LM301B LED's, this fixture produces 15,000+ Lumens with just 95 Watts of power. Equivalent to 220W T5 or 300W CFL output or 200W metal halide.
Top Features
- High efficiency Samsung LM301B LED
- White Light Full Spectrum for better results
- Reliable passive cooled design
- Better canopy light penetration with diffused light
- Non-Dimmable Meanwell Power Supply included with NEMA 1-15p plug
Specifications
| Power | 95 Watts |
| Voltage Range | 90 VAC to 264 VAC |
| LED | 192 pcs Samsung LM301B |
| Flowering Footprint | 2'X2' |
| Veg Footprint | 3'X3' |
| System Efficiency | 170 Lm/W |
| System PPF Efficacy | 2.45 μmol/joule |
| Total output | 235 PPF |
| Dimensions | 325mm X 280mm |
Dimming and Extension
Does not include dimming. Non Dimmable design.
Extension are not recommended as they can break the connector on board. Philmore HUALAND1 HUALAND2 More More2
View full product details
HLG 65 V2
$99.00
HLG 65 V2 Lamp is designed for vegging, clones, supplement light or a small plant. This lamp uses our custom designed High efficiency white light Quantum Boards. With a total of 120 pcs Samsung LM301B LED's, this fixture produces 10,000 Lumens with just 65 Watts of power. Equivalent to 150W T5 or 200W CFL output or 150W metal halide.
Top Features
- High efficiency QB120 Quantum Board
- White Light Full Spectrum 4000K. Ideal for veg and flowering in small spaces
- Reliable passive cooled design
- Better canopy light penetration with diffused light
- Non-Dimmable Meanwell Power Supply included with NEMA 1-15p plug
Specifications
| Power | 65 Watts |
| Voltage Range | 90 VAC to 264 VAC |
| LED | 120 pcs Samsung LM301B |
| Flowering Footprint | 2'X1' or 1'X2' |
| Veg Footprint | 2'X2' |
| System Efficiency | 165 Lm/W |
| System PPF Efficacy | 2.35 μmol/joule |
| Total output | 152 PPF |
| Dimensions | 280mm X 240mm |
Not Daisy Chainable
Dimming and Extension
Does not include dimming. Compatible with DC LED Rotary and Remote PWM dimmer that are rated 24VDC 2.5A or higher.
Extension Options Philmore COOLM Hanvex . Weight or pull from extension can break the connector on board. Recommended 10 feet length or shorter. Power may drop 5% to 10% depending on extension length due to voltage drop in extension.
Note: Got the product and need to extend the DC side wire ?
Get a 'DC 2.1 x 5.5 Extension' from Amazon or Ebay
Get a '2.1 5.5 Y Splitter' if you buy a 2nd board and want to share the power between 2 or more boards
View full product details
HLG 40
Sold Out
HLG 40 Lamp is designed for vegging, clones, greens, supplement light. This lamp uses our custom designed High efficiency white light Quantum Boards. Equivalent to 80W T5 or 120Watts of CFL output.
Top Features
- High efficiency QB96 Quantum Board
- Ideal for veg and supplement light
- Longer power cables for easier installation
- White Light Full Spectrum for better results
- Non-Dimmable Meanwell Power Supply included with NEMA 1-15p plug
- Reliable passive cooled design
- Better canopy light penetration with diffused light
Specifications
| Power | 37 Watts |
| Voltage Range | 90 VAC to 264 VAC |
| LED | 96 pcs Samsung 561C |
| Flowering Footprint | na |
| Veg Footprint | 1'X2' |
| System Efficiency | 156 Lm/W |
| System PPF Efficacy | 2.25 μmol/joule |
| Total output | 83 PPF |
| Dimensions | 560mm X 65mm |
We would appreciate your feedback for this new product
View full product details
ELITE 360 LED Kit
$349.00 $399.00
HLG ELITE 360 LED Kit is 360W LED kit and is powered with our custom designed high efficiency Full Spectrum White LED with boosted Red and Deep Red LED. Designed for greenhouse and indoor horticulture. Kit comes un-assembled with parts only. Elite 360 is an upgrade to 315W CMH or a equivalent to 600W HPS.
Goniophotometer Test Report with waterproof cover on LED
Goniophotometer Test Report without waterproof cover on LED
Top Features
- High efficiency White led with 660nm Deep Red and 630nm Red
- Reliable Passive Cooled Design
- Full Spectrum for better results
- Waterproof lens cover included
- Ideal for Veg and Bloom
- Driver with 12V DC Aux for adding an optional fan or controller
- 1 Year Warranty
- Designed and made in USA
Includes
- 2x Elite Quantum Boards® with thermal pad
- 2x SSTX Pin heatsink
- Inventronics EUD-320 Driver
- Flame plate
- Hanger, Cord, Cable joiner, fastener
Specifications
| Power | 360 Watts |
| Voltage Range | 120-277 VAC |
| LED | White + Red + Deep Red |
| Flowering Footprint | 3'X3' or 2'X4' |
| Veg Footprint | 4'X4' |
| System PPF Efficacy | 2.04 μmol/joule |
| System PPF Efficacy (without cover) | 2.20 μmol/joule |
| Total output | 754 PPF |
| Total output (without cover) | 810 PPF |
| Weight | 12.5 lbs |
| Dimensions | 26"X6"x4" |
| Ingress Protection | IP65 |
*Use flat screws for LED boards. The cone shape screw is for waterproof cover.
** Requires a 0-10V signal
*** Thermal pad is not adhesive and screws are required to install board. Pad may be blue or grey in color.
Standard Spectrum
Full spectrum White with boosted Red for excellent results in both Veg and Bloom
View full product details
QB288 V1 & Slate 2 Single Combo
$64.00 $99.00
QB288 V1 Quantum Board & Slate 2
High efficiency boards designed for DIY projects. No Thermal Interface Material or paste is required.
Specifications
- One QB288 V1 Board
- One Slate 2 Single heatsink. Black
- Connectors rated 300V 9A
- Dimensions 6.833" x 11.25
- Max current per board 3000mA
Flux Characteristics with QB 288 V1 3000K, S6 Bin at 55C
| VDC | Current (mA) | Watts at Board | Lm/W at Board (55C) | μmoles/joule at Board (55C) |
| 47.23 | 500 | 23.67 | 195.5 | 2.90 |
| 48.96 | 1050 | 51.40 | 183.6 | 2.73 |
| 49.68 | 1400 | 69.52 | 177.6 | 2.64 |
| 51.12 | 2100 | 107.35 | 167.3 | 2.48 |
| 51.66 | 2400 | 123.98 | 163.6 | 2.43 |
| 52.20 | 2800 | 146.16 | 158.8 | 2.36 |
- Allow tolerance of an additional 1V while matching drivers.
- Please use this as a reference only.
QB288 V2 & Slate 2 Single Combo
$84.00 $225.00
QB288 V2 Quantum Board & Slate 2
High efficiency boards designed for DIY projects. No Thermal Interface Material or paste is required.
Specifications
- One QB288 V2 Board made by Samsung with 301B LED
- One Slate 2 Single heatsink. Black
- Connectors rated 300V 9A
- Dimensions 6.833" x 11.25
- Max current per board 3000mA
Flux Characteristics with QB 288 V2 3000K, S6 Bin at 55C
| VDC | Current (mA) | Watts at Board | Lm/W at Board (55C) | μmoles/joule at Board (55C) |
| 45.72 | 500 | 22.86 | 206 | 3.00 |
| 46.98 | 1050 | 49.33 | 196.10 | 2.85 |
| 47.70 | 1400 | 66.78 | 190.50 | 2.77 |
| 48.96 | 2100 | 102.82 | 180.77 | 2.63 |
| 49.50 | 2400 | 118.80 | 177.50 | 2.58 |
| 49.86 | 2800 | 139.60 | 173.80 | 2.53 |
- Allow tolerance of an additional 1V while matching drivers.
- Please use this as a reference only.
View full product details
QB288 V2 & Slate 2 Double Combo
$169.00 $225.00
QB288 V2 Quantum Board & Slate 2 Double
High efficiency boards designed for DIY projects. No Thermal Interface Material or paste is required.
Specifications
- 2x QB288 V2 Boards made by Samsung with 301B LED
- One Double Slate 2 heatsink. Black or clear aluminum
- Connectors rated 300V 9A
- Dimensions 6.833" x 11.25
- Max current per board 3000mA
Flux Characteristics with QB 288 V2 3000K, S6 Bin at 55C
| VDC | Current (mA) | Watts at Board | Lm/W at Board (55C) | μmoles/joule at Board (55C) |
| 45.72 | 500 | 22.86 | 206 | 3.00 |
| 46.98 | 1050 | 49.33 | 196.10 | 2.85 |
| 47.70 | 1400 | 66.78 | 190.50 | 2.77 |
| 48.96 | 2100 | 102.82 | 180.77 | 2.63 |
| 49.50 | 2400 | 118.80 | 177.50 | 2.58 |
| 49.86 | 2800 | 139.60 | 173.80 | 2.53 |
- Allow tolerance of an additional 1V while matching drivers.
- Please use this as a reference only.
View full product details
QB288 V2 Rspec & Slate 2 Triple
$279.00 $399.00
QB288 V2 Rspec & Slate 2 Triple
No Thermal Interface Material or paste is required.Specifications
- Three QB 288V2 Rspec
- One Triple Slate 2 heatsink
- Connectors rated 300V 9A
- Dimensions 6.833" x 11.25
- Max current per board 3000mA @ 54V
Recommended driver(350Watts max) for 3x QB 288 boards in series HLG-320H-C1750A
Datasheet of Samsung LM301B Datasheet used in R spec Quantum Board ®
QB288 V2 Quantum Board
$65.00 $99.00
QB288 V2 Quantum Boards
QB 288 V2 are made USA by Horticulture Lighting Group. Each board has 288 highest flux and lowest voltage bin for an unbeatable performance.
High efficiency boards designed for DIY projects. Available in 3000K and 4000K. No Thermal Interface Material or paste is required.
Specifications
- 288pcs Samsung 301B Bin Diodes
- Connectors rated 300V 9A
- Dimensions 6.833" x 11.25
- Max current per board 3000mA
Flux Characteristics with QB 288 V2 3000K, S6 Bin at 55C
| VDC | Current (mA) | Watts at Board | Lm/W at Board (55C) | μmoles/joule at Board (55C) |
| 45.72 | 500 | 22.86 | 206 | 3.00 |
| 46.98 | 1050 | 49.33 | 196.10 | 2.85 |
| 47.70 | 1400 | 66.78 | 190.50 | 2.77 |
| 48.96 | 2100 | 102.82 | 180.77 | 2.63 |
| 49.50 | 2400 | 118.80 | 177.50 | 2.58 |
| 49.86 | 2800 | 139.60 | 173.80 | 2.53 |
- Allow tolerance of an additional 1V while matching drivers.
- Please use this as a reference only.
May require an Aluminum plate or heatsink if running 75+ watts. Heatsink requirements depends on application and power.
View full product details
QB288 V1 Quantum Board
$45.00 $75.00
QB288 V1 Quantum Boards
QB 288 3000K are made in USA
High efficiency boards designed for DIY projects. No Thermal Interface Material or paste is required.
Specifications
- Connectors rated 300V 9A
- Estimated LER 321.60 lm/W
- Estimated QER 4.86 µmol/J
- Dimensions 6.833" x 11.25
- Max current per board 3000mA
Flux Characteristics with QB 288 V1 3000K
| VDC | Current (mA) | Watts at Board | Lm/W at Board (55C) | μmoles/joule at Board (55C) |
| 47.23 | 500 | 23.67 | 195.5 | 2.90 |
| 48.96 | 1050 | 51.40 | 183.6 | 2.73 |
| 49.68 | 1400 | 69.52 | 177.6 | 2.64 |
| 51.12 | 2100 | 107.35 | 167.3 | 2.48 |
| 51.66 | 2400 | 123.98 | 163.6 | 2.43 |
| 52.20 | 2800 | 146.16 | 158.8 | 2.36 |
- Allow tolerance of an additional 1V while matching drivers.
- Please use this as a reference only.
May require an Aluminum plate or heatsink if running 60+ watts. Heatsink requirements depends on application and power.
View full product details
QB120 V2 Quantum Boards
$132.00 $200.00
QB120 Quantum Boards (4 Pack)
High efficiency boards designed for DIY projects. Each board can be powered up to 70 watts. No Thermal Interface Material or heatsink is required. Does not work with Slate series Heatsinks
| 3000K | 3500K | 4000K |
Specifications
- 4 piece QB 120 LED Boards
- 120pcs Samsung LM301B LED per board
- 2 Molex Connectors, Push-Button Type
- Dimensions 280mm x 240mm
- Max current per board 2800mA
Connector Options
Board's power wires can optionally be soldered.
- Molex Connector
Wire can be pushed into the connector. To unmate, push down lever on the housing to allow the wire to be disengaged. Rated 300V 9A. Max 10 boards in series wiring.
Driver Options
Single Board
GSC40B-1400 for US with IEC 60320/C7 Power Cord.
OWA-60U-24 for US
LPC-35-1400
LPC-60-1750
LPF-40-24 or LPF-40D-24
LPF-60 -24 or LPF-60D-24
HLG-40H-24
HLG-60H-24
GSC40E-1400 for EU
2 BoardsLPC-100-2100 - 2x QB 120 in series
LPF-90D-48 or LPF-90-48 - 2x QB 120 in series
HLG-80H-48 - 2x QB 120 in series
HLG-100H-48 - 2x QB 120 in series
HLG-120H-48 - 2x QB 120 in series
HLG-240H-C2100 - 4x QB 120 in series
View full product details
QB132 V2 Quantum Boards
$135.00 $200.00
QB132 Quantum Boards (4 Pack)
High efficiency boards designed for DIY projects. Each board can be powered up to 75 watts. No Thermal Interface Material or heatsink is required. Does not work with Slate series Heatsinks.
Specifications
- 4 piece QB 132 LED Boards
- 132pcs Samsung LM301B LED per board
- 1 Molex Connectors, Push-Button Type
- Dimensions 300mm x 225mm
- 36V DC. Max current 2100mA
Board's power wires can optionally be soldered.
- Molex Connector
Wire can be pushed into the connector. To unmate, push down lever on the housing to allow the wire to be disengaged. Rated 300V 9A. Max 10 boards in series wiring.
Driver Options
- LPF-60-36 - 1x QB132
- HLG-185H-C1400 - 4x QB 132 in series
- HLG-240H-C1750 - 4x QB 132 in series
For more driver options check here
View full product details
QB144 V2 Quantum Boards
$125.00
QB144 Quantum Boards (4 Pack)
High efficiency boards designed for DIY projects. Each board can be powered up to 75 watts. Can use used with Pin Heatsink or Extruded Aluminum. 36V design makes it ideal upgrade for COB on Pin Heatsink.
Includes
- 4 piece QB 144 LED Boards
- 4pcs Thermal Adhesive Pads
Specifications
- 144pcs Samsung LM301B LED per board
- 1 Molex Connectors, Push-Button Type
- Board Size 95.25mm X 70.36mm , 3.75 inches X 2.77 inches
- 36V DC. Max current 2100mA
Thermal Management and Installation
Pin Heatsink or Extruded Aluminum is Required. Board will overheat and fail without heatsink. Clean heatsink with isopropl alcohol. Remove liner from adhesive pad and apply on back of board. Remove liner from other side and apply to heatink.
Apply pressure on corner of board without touching the LED. This will ensure board and heatsink get bonded properly with the adhesive pad. Adhesive pad is permanent and cannot be removed or adjusted.
Driver Options
- LPF-60-36 - 1x QB144
- LPF-40-36 - 1x QB144
- LPC-60-1050 - 1x QB144
- HLG-60H-36 - 1x QB144
- HLG-40H-36 - 1x QB144
- HLG-185H-C1400 - 4x QB 144 in series
- HLG-240H-C1750 - 4x QB 144 in series
- HLG-320H-C2100 - 4x QB 144in series
Wire can be pushed into the connector. To unmate, push down lever on the housing to allow the wire to be disengaged. Rated 300V 9A. Max 10 boards in series wiring.
View full product details
HLG SABER
$134.00
HLG SABER
Does not include power supply
High efficiency waterproof LED BAR designed for DIY projects. Each board can be powered up to 120 watts. Passive cooled 36V design and 4ft length provides a great spread with minimal shadows.
INCLUDES
- 1x HLG SABER BAR
- Hanger
SPECIFICATIONS
- 220pcs Samsung LM301B LED and 10 High power Deep Red LED
- 4ft Cable to connect power. Does not include power supply
- Max 36V DC. Max current 3200mA
- 44 inches length
DRIVERS
Compatible with Constant Current LED drivers
- LPC-60-1400 - 1 SABER 100
- LPC-100-2100 - 1 SABER 100
- LPF-60-36 or LPF-60D-36 - 1 SABER 100
- LPF-90-36 or LPF-90D-36 - 1 SABER 100
- HLG-60H-36 - 1 SABER 100
- HLG-80H-36 - 1 SABER 100
- HLG-100H-36 - 1 SABER 100
- HLG-320H-C2800 - 2 or 3 SABER 100 in series
- HLG-480H-C2800 - 3 or 4 SABER 100 in series
Coverage
Assuming 90-100 watts per SABER
| 4 x 2 ft Veg | SABER |
| 4 x 2 ft Flower | 2x SABER |
| 4 x 4 ft Veg | 2x SABER |
| 4 x 4 ft Flower | 5x SABER |
| 5 x 5 ft Veg | 3x SABER |
| 5 x 5 ft Flower | 6x SABER |
HANGER
Hole in end cap for hanging with cable hanger included or to pass a mounting screw
QB 3 FAR RED
$9.00
Specifications
- Forward Voltage Vf = 6.7 VDC -7.0 VDC @ 1000mA
- 220 mm x 30mm
- Peak Wavelength 730nm
- Max Recommended Current 1000mA
- Recommended Installation: Screw, Double side adhesive tape.
Recommended Far Red LED Modules for even coverage
| Space in ft x ft | QB 3 Modules |
| 2x2, 2x2.5, 3x3 | 1 or more in Parallel |
| 4x4, 4x5, 5x5 | 2 in series |
| 6x6 | 3 in series |
Recommended Usage
Flowering Initiator. Power on for 3 to 10 minutes during transition from Lights On (Photo Period) to Lights Off (Dark Period).
Driver Options (Constant Current LED Driver only)
APC-8-700 - One or more QB 3 in Parallel
APC-12-700 - One or Two QB 3 in Series
APC-16-700 - Two or Three QB 3 in Series
APC-25-700 - Three or Four QB 3 in Series
LPC-20-700 - Three or Four QB 3 in Series
Meanwell LDD H are a great way of using standard 12v - 54V power supplies to power QB 3 strips. Standard 12V power supply can power 1 board with LDD. Standard 18V power supply can power 2 board in series on a LDD. Standard 24V power supply can power 3 board in series on a LDD. These step down DC-DC drivers are available in 300mA, 350mA, 500mA, 600mA, 700mA, 1000mA. LDD can convert 10 to 54VDC input into Constant Current to power for QB 3
LDD-300HW
LDD-350HW
LDD-500HW
LDD-600HW
LDD-700HW
LDD-1000HW
View full product details
QB11 Quantum Board
450nm, 470nm, 521nm 630nm, 660nm
$25.00 $49.00
QB11 Quantum Boards Deep Red
High efficiency Deep Red Strip
55.6% radiometric efficiency at 350mA (4.75 watts radiometric output with 8.54 watts electrical Input)
Specifications
- 11pcs High Power Deep red 660nm Diodes
- Peak wavelength 660nm
- Forward Voltage 22.5+ VDC at 350mA, 24.70+ VDC at 700mA
- Dimensions 30mm x 560mm
- Max current per strip 1400mA
- Heatsink required for over 1050mA
QB11 Quantum Boards Red
High efficiency Red Strip
Specifications
- 11pcs High Power red 630nm Diodes
- Peak wavelength 630nm
- Forward Voltage 23+ VDC at 350mA, 25.5+ VDC at 700mA
- Dimensions 30mm x 560mm
- Max current per strip 1400mA
- Heatsink required for over 1050mA
QB11 Quantum Boards Blue
High efficiency Blue Strip
Specifications
- 11pcs High Power Blue 450nm Diodes
- Peak wavelength 450nm
- Forward Voltage 33.80+ VDC at 700mA
- Dimensions 30mm x 560mm
- Max current per strip 1400mA
- Heatsink required for over 1050mA
Molex Connector
QB 11 Strips have Molex Connectors. +ve and -ve on opposite ends of strip. Wire can be pushed into the connector. To unmate, push down lever on the housing to allow the wire to be disengaged.
Driver Options
Meanwell LLD H are a great way of using standard power supplies to power QB 11 strips. These step down DC-DC drivers are available in 300mA, 350mA, 500mA, 600mA, 700mA, 1200mA. LDD-xxxHW option comes with wires attached. Also available in Pin and SMT style
Design considerations
- Output voltage will always step down by 3 volts from input DC voltage. This means if input in 48 VDC then you cannot max 45VDC in output. Ensure the input is a minimum of QB 11 forward voltage and add another 3 volts
- LLD H 300mA, 350mA, 500mA, 600mA, 700mA options can accept 2 ~ 52VDC input range. 1200mA option can accept only 2 ~ 46VDC
- QB 11 Deep red and Blue have different forward voltage. Blue and Deep red cannot be run in parallel together. Blue has as Higher forward voltage.
Wiring example with QB 288, Meanwell HLG-120H-54 Driver and QB 11 powered through LDD-700HW
LDD-350HW
LDD-500HW
LDD-600HW
LDD-700HW
Other Drivers for Single QB 11 Strip or multiple in parallel
APC-16-350APC-25-700
APC-35-1050
LPC-20-350
LPC-20-700 for Deep Red only
LPC-35-700
LPC-35-1050 for Deep Red only
LPF-16-30 for Deep Red onlyLPF-16-36
LPF-25-30 for Deep Red only
LPF-25-36
LPF-40-36
PLD-16-350
PLD-25-700
PLD-40-1050B
PCD-25-700
LPF-60-36 for 2 or more QB11 in parallel
LPF-90-36 for 2 or more QB11 in parallel
HLG-40H-30 for Deep Red onlyHLG-40H-36
HLG-60H-30 for Deep Red only. 2 or more QB11 in parallel
HLG-60H-36 2 or more QB11 in parallel
Drivers for Multiple QB 11 Strip in series
APC-25-350 for 2x QB 11 in seriesAPC-35-500 for 2x QB 11 Deep Red in series
PLD40-500B for 2x QB 11 in series PCD-40-500BPCD-60-700B HLG-60H-C700 for 3x QB 11 in series HLG-80H-C700 for 4x QB 11 in series
View full product details
QB96 Elite V2 Quantum Board
$54.00 $99.00
QB96 Elite V2 Quantum Board
QB96 Elite V2 is a white LED Board with boosted red spectrum. Each Board is powered by 64 high power white LED, 16 630nm Red LED and 16 660nm Deep Red LED. QB96 Elite V2 offers a wider spectrum than standard 70 CRI, 80 CRI and 90 CRI LED.
Heatsink and Thermal Pad required to run board over 500mA (25 watts)
Includes
- QB 96 Elite Quantum Board
- Thermal Pad, Permanent Adhesive - Both Sides
Note: Thermal pad is Permanent adhesive. Once installed it cannot be removed. Board must be installed on a 120mm diameter or bigger pin heatsink or suitable Aluminum extrusion.
Specifications
- Board Size 95.25mm X 70.36mm , 3.75 inches X 2.77 inches
- Absolute max 6000mA
Flux Characteristics at 55C
| VDC | Current (mA) | Watts at Board | μmoles/joule at Board (55C) |
| 51.5 | 1400 | 72 | 2.60 |
| 52.2 | 1750 | 91 | 2.52 |
| 53.4 | 2400 | 128 | 2.40 |
| 54 | 2800 | 151 | 2.36 |
| 55 | 3400 | 187 | 2.32 |
| 56 | 4000 | 224 | 2.25 |
- Allow tolerance of an additional 1V while matching constant current drivers.
- +/- 5% Flux tolerance.
- Please use this as a reference only.
- View Goniophotometer Test Report for Elite 360
Heatsink Recommendations
Driver Recommendations
Single QB 96 Elite V2
- HLG-80H-54
- HLG-100H-54
- HLG-120H-54
- HLG-150H-54
- HLG-185H-54
Two QB 96 Elite V2 in series
- HLG-320H-C2800
- HLG-240H-C2100
- HLG-185H-C1400
- HLG-120H-C1050
Four QB 96 Elite V2 in series
- HLG-480H-C2100
- HLG-320H-C1400
Multiple QB 96 Elite V2 in parallel
- HLG-240H-54 with 2 or more boards in parallel
- HLG-320H-54 with 2 or more boards in parallel
- HLG-480H-54 with 3 or more boards in parallel
- HLG-600H-54 with 3 or more boards in parallel
View full product details
QB96 Elite V2 Engine
$69.00 $99.00
QB96 Elite V2 Quantum Board Engine
QB96 Elite V2 is a white LED Board with boosted red spectrum. Each QB 96 Elite board has 64 High power White, 16 Red (630nm) and 16 Deep Red (660nm). QB96 Elite V2 offers a wider spectrum than standard 70 CRI, 80 CRI and 90 CRI LED.
Includes
- QB 96 Elite Quantum Board
- Thermal Pad, Tacky - Both Sides
- SSTX Heatsink
- M3 Screws for Board
Specifications
- QB 96 Elite Board Size 95.25mm X 70.36mm , 3.75 inches X 2.77 inches
- Max 4200mA with SSTX Heatsink and Thermal Pad
- Absolute max 6000mA
- Heatsink 125mm x 125mm base, 170mm x 170mm Flared side
- M3 screw holes for board, M4 for mounting engine.
Thermal Pad
3M Acrylic Interface Pad 5590H OR Bergquist GAP PAD HC 3.0 is included. Remove liner on one side of die cut thermal pad, align screw holes with board and apply pad to board, remove liner from the other side and install board to heatsink. Thermal pad is not permanent and allows rework.
Note: Thermal pad is Tacky and not adhesive. Board requires screws to ensure board is securely mounted to heatsink.
(White) 3M Acrylic Interface Pad 5590H
(Blue) Bergquist GAP PAD HC 3.0
Flux Characteristics at 55C
| VDC | Current (mA) | Watts at Board | μmoles/joule at Board (55C) |
| 51.5 | 1400 | 72 | 2.60 |
| 52.2 | 1750 | 91 | 2.52 |
| 53.4 | 2400 | 128 | 2.40 |
| 54 | 2800 | 151 | 2.36 |
| 55 | 3400 | 187 | 2.32 |
| 56 | 4000 | 224 | 2.25 |
- Allow tolerance of an additional 1V while matching constant current drivers.
- +/- 5% Flux tolerance.
- Please use this as a reference only.
- View Goniophotometer Test Report for Elite 360
- Recommended Board temperature 85C max
Lens Compatibility
Lens PL1758CV
Gasket KGAS04
Driver Recommendations
Single QB 96 Elite V2
- HLG-80H-54
- HLG-100H-54
- HLG-120H-54
- HLG-150H-54
- HLG-185H-54
- HBG-160-60
- HBG-200-60
- LPC-100-1750
- LPF-90-54 , LPF-90D-54
- ELG-150-54, ELG-200-54 recommended for 200+VAC only
Two QB 96 Elite V2 in series
- HLG-320H-C2800
- HLG-240H-C2100
- HLG-185H-C1400
- HLG-120H-C1050
- ELG-240-C2100, ELG-200-C1750, ELG-300-M for 200+ VAC only
Four QB 96 Elite V2 in series
- HLG-480H-C2100
- HLG-320H-C1400
Multiple QB 96 Elite V2 in parallel
- HLG-240H-54 with 2 or more boards in parallel
- HLG-320H-54 with 2 or more boards in parallel
- HLG-480H-54 with 3 or more boards in parallel
- HLG-600H-54 with 3 or more boards in parallel
- ELG-240-54 recommended for 200+VAC only
View full product details
135W QB V2 LED Kit
$187.50
Ready to assemble 135W LED V2 Board kit
135 Watt Lamp Kit. High Efficiency QB288 V2 powered with Samsung top bin Diodes. Suited for main light and supplement lighting.
| Dimmable | 60-150Watts |
| Veg Footprint | 3x3 sqft |
| Recommended Flower Footprint | 2x2 sqft |
| Max Flower Footprint | 2x3 sqft |
QB288 V2- 288pcs Samsung 301B
Includes
- QB288 Board. Made by Samsung with 301B LED
- 1x Slate 2 Predrilled 340mm Heatsink
- Meanwell HLG-120H-54A LED Driver. 93.5% Driver Efficiency
- 6FT Nema 5-15P 16/3 SJTW NA Power Cord or equivalent for standard 120VAC with cable connector
- 2ft solid core Wire, 2x Wago Connectors for DC wiring
- Hanger Clips
Board Level Efficacy with QB 288 V2 2.58 µmol/J , 177.5Lm/W
No Thermal Interface Material is required between the LED board and the heatsink.
Remove black plug on driver and use Philips head screw driver for dimming
View full product details
260W QB V1 LED Kit
$279.00
Ready to assemble 260W LED V1 Board kit
260 Watt Lamp Kit. High Efficiency QB288 powered with Samsung top bin Diodes. Suited for main light and supplement lighting.
| Dimmable | 135-285 Watts |
| Length | 600mm |
| Width | 205mm |
| Veg Footprint | 4x4 sqft |
| Recommended Flower Footprint | 3x3 sqft or 2x4 sqft |
QB288 V1- 288pcs 2835 LED
Includes
- 2x Boards
- 1x Slate 2 Double Predrilled 600mm Heatsink
- Meanwell HLG-240H LED Driver. 93.5% Driver Efficiency. Boards should be wired in series with the driver for maximum output
- 6FT Nema 5-15P 16/3 SJTW NA Power Cord or equivalent for standard 120VAC with cable connector
- 2ft solid core Wire, 2x Wago Connectors for DC wiring
- Hanger Clips
Lamp Efficacy with QB 288 V1 2.33 µmol/J , 157Lm/W
Board Level Efficacy with QB 288 V1 2.48 µmol/J , 167.3Lm/W
No Thermal Interface Material is required between the LED board and the heatsink.
Remove black plug on driver and use Philips head screw driver for dimming
View full product details
