HLG 100 V2

High Efficiency 100W

$149.00

HLG 100 V2 uses our custom designed High efficiency white light Quantum Boards. With a total of 192 pcs Samsung LM301B LED's, this fixture produces 15,000+ Lumens with just 95 Watts of power. Equivalent to 220W T5 or 300W CFL output or 200W metal halide.

Top Features

• High efficiency Samsung LM301B LED
• White Light Full Spectrum for better results
• Reliable passive cooled design
• Better canopy light penetration with diffused light
• Non-Dimmable Meanwell Power Supply included with NEMA 1-15p plug

Specifications

Dimming and Extension

Does not include dimming. Non Dimmable design.

Extension are not recommended as they can break the connector on board.  Philmore  HUALAND1   HUALAND2  More  More2  

HLG 65 V2

65W Lamp for Veg

$99.00

HLG 65 V2 Lamp is designed for vegging, clones, supplement light or a small plant. This lamp uses our custom designed High efficiency white light Quantum Boards. With a total of 120 pcs Samsung LM301B LED's, this fixture produces 10,000 Lumens with just 65 Watts of power. Equivalent to 150W T5 or 200W CFL output or 150W metal halide.

Top Features

• High efficiency QB120 Quantum Board
• White Light Full Spectrum 4000K. Ideal for veg and flowering in small spaces
• Reliable passive cooled design
• Better canopy light penetration with diffused light
• Non-Dimmable Meanwell Power Supply included with NEMA 1-15p plug

Specifications

Not Daisy Chainable

Dimming and Extension

Does not include dimming. Compatible with DC LED Rotary and Remote PWM dimmer that are rated 24VDC 2.5A or higher.  

Extension Options Philmore  COOLM  Hanvex . Weight or pull from extension can break the connector on board. Recommended 10 feet length or shorter. Power may drop 5% to 10% depending on extension length due to voltage drop in extension.

Note: Got the product and need to extend the DC side wire ?

Get a 'DC 2.1 x 5.5  Extension' from Amazon or Ebay

Get a '2.1 5.5 Y Splitter' if you buy a 2nd board and want to share the power between 2 or more boards

HLG 40

For Veg and Clones

Sold Out

HLG 40 Lamp is designed for vegging, clones, greens, supplement light. This lamp uses our custom designed High efficiency white light Quantum Boards. Equivalent to 80W T5 or 120Watts of CFL output.

Top Features

• High efficiency QB96 Quantum Board
• Ideal for veg and supplement light
• Longer power cables for easier installation
• White Light Full Spectrum for better results
• Non-Dimmable Meanwell Power Supply included with NEMA 1-15p plug
• Reliable passive cooled design
• Better canopy light penetration with diffused light

Specifications

We would appreciate your feedback for this new product

ELITE 360 LED Kit

Horticulture Lighting Group

$349.00 $399.00

HLG ELITE 360 LED Kit is 360W LED kit and is powered with our custom designed high efficiency Full Spectrum White LED with boosted Red and Deep Red LED. Designed for greenhouse and indoor horticulture. Kit comes un-assembled with parts only. Elite 360 is an upgrade to 315W CMH or a equivalent to 600W HPS.

Goniophotometer Test Report  with waterproof cover on LED

Goniophotometer Test Report  without waterproof cover on LED

Top Features

• High efficiency White led with 660nm Deep Red and 630nm Red
• Reliable Passive Cooled Design
• Full Spectrum for better results
• Waterproof lens cover included
• Ideal for Veg and Bloom
• Driver with 12V DC Aux for adding an optional fan or controller
• 1 Year Warranty
• Designed and made in USA

Includes

• 2x Elite Quantum Boards®  with thermal pad
• 2x SSTX Pin heatsink
• Inventronics EUD-320 Driver
• Flame plate
• Hanger, Cord, Cable joiner, fastener

Specifications

*Use flat screws for LED boards. The cone shape screw is for waterproof cover.

** Requires a 0-10V signal

*** Thermal pad is not adhesive and screws are required to install board. Pad may be blue or grey in color.

Standard Spectrum

Full spectrum White with boosted Red for excellent results in both Veg and Bloom

QB288 V1 & Slate 2 Single Combo

QB288 V1 Combo

Sold Out $99.00

QB288 V1 Quantum Board & Slate 2

High efficiency boards designed for DIY projects. No Thermal Interface Material or paste is required.

Specifications

• One QB288 V1 Board
• One Slate 2 Single heatsink. Black
• Connectors rated 300V 9A
• Dimensions 6.833" x 11.25
• Max current per board 3000mA

Flux Characteristics with QB 288 V1 3000K, S6 Bin at 55C

QB288 V2 & Slate 2 Single Combo

Board & Heatsink

$75.00 $225.00

QB288 V2 Quantum Board & Slate 2

High efficiency boards designed for DIY projects. No Thermal Interface Material or paste is required.

Specifications

• One QB288 V2 Board made by Samsung with LM301H LED
• One Slate 2 Single heatsink. Black
• Connectors rated 300V 9A
• Dimensions 6.833" x 11.25
• Max current per board 3000mA

Flux Characteristics with QB 288 V2 3000K, S6 Bin at 55C

QB288 V2 & Slate 2 Double Combo

Board & Heatsink

$149.00 $225.00

QB288 V2 Quantum Board & Slate 2 Double

High efficiency boards designed for DIY projects. No Thermal Interface Material or paste is required.

Specifications

• 2x QB288 V2 Boards made by Samsung with LM301H LED
• One Double Slate 2 heatsink. Black or clear aluminum
• Connectors rated 300V 9A
• Dimensions 6.833" x 11.25
• Max current per board 3000mA

Flux Characteristics with QB 288 V2 3000K, S6 Bin at 55C

QB288 V2 Rspec & Slate 2 Triple

Horticulture Lighting Group

$279.00 $399.00

QB288 V2 Rspec & Slate 2 Triple

Specifications

• Three QB 288V2 Rspec
• One Triple Slate 2 heatsink
• Connectors rated 300V 9A
• Dimensions 6.833" x 11.25
• Max current per board 3000mA @ 54V

 Recommended driver(350Watts max) for 3x QB 288 boards in series HLG-320H-C1750A

Datasheet of Samsung LM301H Datasheet used in R spec Quantum Board ®

QB288 V2 Quantum Board

288 LM301B LED

$55.00 $99.00

QB288 V2 Quantum Boards

QB 288 V2 are made USA by Horticulture Lighting Group. Each board has 288 highest flux and lowest voltage bin for an unbeatable performance.

High efficiency boards designed for DIY projects. Available in 3000K and 4000K. No Thermal Interface Material or paste is required.

Datasheet

Specifications

• 288pcs Samsung 301B Bin Diodes
• Connectors rated 300V 9A
• Dimensions 6.833" x 11.25
• Max current per board 3000mA

Flux Characteristics with QB 288 V2 3000K, S6 Bin at 55C

May require an Aluminum plate or heatsink if running 75+ watts. Heatsink requirements depends on application and power.

QB288 V1 Quantum Board

QB288 V1

$29.00

QB288 V1 Quantum Boards

QB 288 3000K are made in USA

High efficiency boards designed for DIY projects. No Thermal Interface Material or paste is required.

Specifications

• Connectors rated 300V 9A
• Estimated LER 321.60 lm/W
• Estimated QER 4.86 µmol/J
• Dimensions 6.833" x 11.25
• Max current per board 3000mA

Flux Characteristics with QB 288 V1 3000K

May require an Aluminum plate or heatsink if running 60+ watts. Heatsink requirements depends on application and power.

QB120 V2 Quantum Boards

Avaialble on Amazon

$132.00 $200.00

QB120 Quantum Boards (4 Pack)

High efficiency boards designed for DIY projects. Each board can be powered up to 70 watts. No Thermal Interface Material or heatsink is required. Does not work with Slate series Heatsinks

Specifications

• 4 piece QB 120 LED Boards
• 120pcs Samsung LM301B LED per board
• 2 Molex Connectors, Push-Button Type
• Dimensions 280mm x 240mm
• Max current per board 2800mA

Connector Options

Board's power wires can optionally be soldered.

• Molex Connector

Wire can be pushed into the connector. To unmate,  push down lever on the housing to allow the wire to be disengaged. Rated 300V 9A. Max 10 boards in series wiring.

Driver Options

Single Board

GSC40B-1400 for US with IEC 60320/C7 Power Cord.
OWA-60U-24 for US
LPC-35-1400
LPC-60-1750
LPF-40-24 or LPF-40D-24
LPF-60 -24 or LPF-60D-24
HLG-40H-24
HLG-60H-24

GSC40E-1400 for EU

LPC-100-2100 - 2x QB 120 in series
LPF-90D-48 or LPF-90-48 - 2x QB 120 in series
HLG-80H-48 - 2x QB 120 in series
HLG-100H-48 - 2x QB 120 in series
HLG-120H-48 - 2x QB 120 in series

HLG-240H-C2100 - 4x QB 120 in series

QB132 V2 Quantum Boards

Avaialble on Amazon

$135.00 $200.00

QB132 Quantum Boards (4 Pack)

High efficiency boards designed for DIY projects. Each board can be powered up to 75 watts. No Thermal Interface Material or heatsink is required. Does not work with Slate series Heatsinks.

Specifications

• 4 piece QB 132 LED Boards
• 132pcs Samsung LM301B LED per board
• 1 Molex Connectors, Push-Button Type
• Dimensions 300mm x 225mm
• 36V DC. Max current  2100mA

Board's power wires can optionally be soldered.

• Molex Connector

Wire can be pushed into the connector. To unmate,  push down lever on the housing to allow the wire to be disengaged. Rated 300V 9A. Max 10 boards in series wiring.

Driver Options

• LPF-60-36 - 1x QB132
• HLG-185H-C1400 - 4x QB 132 in series
• HLG-240H-C1750 - 4x QB 132 in series

For more driver options check here

QB144 V2 Quantum Boards

4Pcs QB144 Boards

$125.00

QB144 Quantum Boards (4 Pack)

High efficiency boards designed for DIY projects. Each board can be powered up to 75 watts. Can use used with Pin Heatsink or Extruded Aluminum. 36V design makes it ideal upgrade for COB on Pin Heatsink.

Includes

• 4 piece QB 144 LED Boards
• 4pcs Thermal Adhesive Pads

Specifications

• 144pcs Samsung LM301B LED per board
• 1 Molex Connectors, Push-Button Type
• Board Size 95.25mm X 70.36mm , 3.75 inches  X 2.77 inches
• 36V DC. Max current  2100mA

Thermal Management and Installation

Pin Heatsink or Extruded Aluminum is Required. Board will overheat and fail without heatsink. Clean heatsink with isopropl alcohol. Remove liner from adhesive pad and apply on back of board. Remove liner from other side and apply to heatink.

Apply pressure on corner of board without touching the LED. This will ensure board and heatsink get bonded properly with the adhesive pad. Adhesive pad is permanent  and cannot be removed or adjusted.

Driver Options

• LPF-60-36 - 1x QB144
• LPF-40-36 - 1x QB144
• LPC-60-1050 - 1x QB144
• HLG-60H-36 - 1x QB144
• HLG-40H-36 - 1x QB144
• HLG-185H-C1400 - 4x QB 144 in series
• HLG-240H-C1750 - 4x QB 144 in series
• HLG-320H-C2100 - 4x QB 144in series

Wire can be pushed into the connector. To unmate,  push down lever on the housing to allow the wire to be disengaged. Rated 300V 9A. Max 10 boards in series wiring.

QB11 Quantum Board

450nm, 470nm, 521nm 630nm, 660nm

$25.00 $49.00

QB11 Quantum Boards Deep Red

High efficiency Deep Red Strip

Test Report

55.6% radiometric efficiency at 350mA (4.75 watts radiometric output with 8.54 watts electrical Input)

Specifications

• 11pcs High Power Deep red 660nm Diodes
• Peak wavelength 660nm
• Forward Voltage 22.5+ VDC at 350mA, 24.70+ VDC at 700mA
• Dimensions 30mm x 560mm
• Max current per strip 1400mA
• Heatsink required for over 1050mA

QB11 Quantum Boards Red

High efficiency Red Strip

Specifications

• 11pcs High Power red 630nm Diodes
• Peak wavelength 630nm
• Forward Voltage 23+ VDC at 350mA, 25.5+ VDC at 700mA
• Dimensions 30mm x 560mm
• Max current per strip 1400mA
• Heatsink required for over 1050mA

QB11 Quantum Boards Blue

High efficiency Blue Strip

Specifications

• 11pcs High Power Blue 450nm Diodes
• Peak wavelength 450nm
• Forward Voltage 33.80+ VDC at 700mA
• Dimensions 30mm x 560mm
• Max current per strip 1400mA
• Heatsink required for over 1050mA

Molex Connector

QB 11 Strips have Molex Connectors. +ve and -ve on opposite ends of strip. Wire can be pushed into the connector. To unmate,  push down lever on the housing to allow the wire to be disengaged. 

Driver Options

Meanwell LLD H are a great way of using standard power supplies to power QB 11 strips. These step down DC-DC drivers are available in 300mA, 350mA, 500mA, 600mA, 700mA, 1200mA. LDD-xxxHW option comes with wires attached. Also available in Pin and SMT style

Design considerations

• Output voltage will always step down by 3 volts from input DC voltage. This means if input in 48 VDC then you cannot max 45VDC in output. Ensure the input is a minimum of QB 11 forward voltage and add another 3 volts
• LLD H 300mA, 350mA, 500mA, 600mA, 700mA options can accept 2 ~ 52VDC input range. 1200mA option can accept only 2 ~ 46VDC
• QB 11 Deep red and Blue have different forward voltage. Blue and Deep red cannot be run in parallel together. Blue has as Higher forward voltage.

Wiring example with QB 288, Meanwell HLG-120H-54 Driver and QB 11 powered through LDD-700HW

LDD-1200HW

Other Drivers for Single QB 11 Strip or multiple in parallel

Drivers for Multiple QB 11 Strip in series

QB96 Elite V2 Quantum Board

High Power LED Board

$54.00 $99.00

QB96 Elite V2 Quantum Board

QB96 Elite V2 is a white LED Board with boosted red spectrum. Each Board is powered by 64 high power white LED, 16 630nm Red LED and 16 660nm Deep Red LED. QB96 Elite V2 offers a wider spectrum than standard 70 CRI, 80 CRI and 90 CRI LED.

Heatsink and Thermal Pad required to run board over 500mA (25 watts)

Includes

• QB 96 Elite Quantum Board
• Thermal Pad, Permanent Adhesive - Both Sides  

Note: Thermal pad is Permanent adhesive. Once installed it cannot be removed. Board must be installed on a 120mm diameter or bigger pin heatsink or suitable Aluminum extrusion.

Specifications

• Board Size 95.25mm X 70.36mm , 3.75 inches  X 2.77 inches
• Absolute max 6000mA

Flux Characteristics at 55C

QB96 Elite V2 Engine

High Power LED Board

$69.00 $99.00

QB96 Elite V2 Quantum Board Engine

QB96 Elite V2 is a white LED Board with boosted red spectrum. Each QB 96 Elite board has 64 High power White, 16 Red (630nm) and 16 Deep Red (660nm). QB96 Elite V2 offers a wider spectrum than standard 70 CRI, 80 CRI and 90 CRI LED.

Includes

• QB 96 Elite Quantum Board
• Thermal Pad, Tacky - Both Sides  
• SSTX Heatsink
• M3 Screws for Board

Specifications

• QB 96 Elite Board Size 95.25mm X 70.36mm , 3.75 inches  X 2.77 inches
• Max 4200mA with SSTX Heatsink and Thermal Pad
• Absolute max 6000mA
• Heatsink 125mm x 125mm base, 170mm x 170mm Flared side
• M3 screw holes for board, M4 for mounting engine.

Thermal Pad

3M Acrylic Interface Pad 5590H OR Bergquist GAP PAD HC 3.0 is included. Remove liner on one side of die cut thermal pad, align screw holes with board and apply pad to board, remove liner from the other side and install board to heatsink. Thermal pad is not permanent and allows rework.

Note: Thermal pad is Tacky and not adhesive. Board requires screws to ensure board is securely mounted to heatsink.

(White) 3M Acrylic Interface Pad 5590H

(Blue) Bergquist GAP PAD HC 3.0

Flux Characteristics at 55C

Lens Compatibility

Lens PL1758CV

Gasket KGAS04

Driver Recommendations

Single QB 96 Elite V2

• HLG-80H-54
• HLG-100H-54
• HLG-120H-54
• HLG-150H-54
• HLG-185H-54
• HBG-160-60
• HBG-200-60
• LPC-100-1750
• LPF-90-54 , LPF-90D-54
• ELG-150-54, ELG-200-54 recommended for 200+VAC only

Two QB 96 Elite V2 in series

• HLG-320H-C2800
• HLG-240H-C2100
• HLG-185H-C1400
• HLG-120H-C1050
• ELG-240-C2100, ELG-200-C1750, ELG-300-M   for 200+ VAC only

Four QB 96 Elite V2 in series

• HLG-480H-C2100
• HLG-320H-C1400

Multiple QB 96 Elite V2 in parallel

• HLG-240H-54 with 2 or more boards in parallel
• HLG-320H-54 with 2 or more boards in parallel
• HLG-480H-54 with 3 or more boards in parallel
• HLG-600H-54 with 3 or more boards in parallel
• ELG-240-54 recommended for 200+VAC only

135W QB V1 LED Kit

Horticulture Lighting Group

$129.00

Ready to assemble 135W LED V1 Board kit

135 Watt Lamp Kit. High Efficiency. Suited for main light and supplement lighting.

QB288 V1- 288pcs Samsung 561C

Includes

• QB288 Board with 288 pcs led
• 1x Slate 2 Predrilled 340mm Heatsink
• Meanwell HLG-120H-54A LED Driver. 93.5% Driver Efficiency
• 6FT Nema 5-15P 16/3 SJTW NA Power Cord or equivalent for standard 120VAC with cable connector
• 2ft solid core Wire, 2x Wago Connectors for DC wiring
• Hanger Clips

Lamp Efficacy with QB 288 V1 2.27 µmol/J , 152Lm/W

Board Level Efficacy with QB 288 V1 2.43 µmol/J , 163.6Lm/W

LED Gardener Review

No Thermal Interface Material is required between the LED board and the heatsink.

Remove black plug on driver and use Philips head screw driver for dimming

135W QB V2 LED Kit

Free shipping within US

$179.00

Ready to assemble 135W LED V2 Board kit

135 Watt Lamp Kit. High Efficiency QB288 V2 powered with Samsung top bin Diodes. Suited for main light and supplement lighting.

QB288 V2- 288pcs Samsung 301B

Includes

• QB288 Board. Made by Samsung with 301B LED
• 1x Slate 2 Predrilled 340mm Heatsink
• Meanwell HLG-120H-54A LED Driver. 93.5% Driver Efficiency
• 6FT Nema 5-15P 16/3 SJTW NA Power Cord or equivalent for standard 120VAC with cable connector
• 2ft solid core Wire, 2x Wago Connectors for DC wiring
• Hanger Clips

LED Gardener Review

No Thermal Interface Material is required between the LED board and the heatsink.

Remove black plug on driver and use Philips head screw driver for dimming

260W QB V1 LED Kit

Horticulture Lighting Group

$229.00

Ready to assemble 260W LED V1 Board kit

260 Watt Lamp Kit. High Efficiency QB288 powered with Samsung top bin Diodes. Suited for main light and supplement lighting.

QB288 V1- 288pcs 2835 LED

Includes

• 2x Boards
• 1x Slate 2 Double Predrilled 600mm Heatsink
• Meanwell HLG-240H LED Driver. 93.5% Driver Efficiency. Boards should be wired in series with the driver for maximum output
• 6FT Nema 5-15P 16/3 SJTW NA Power Cord or equivalent for standard 120VAC with cable connector
• 2ft solid core Wire, 2x Wago Connectors for DC wiring
• Hanger Clips

Lamp Efficacy with QB 288 V1  2.33 µmol/J , 157Lm/W
Board Level Efficacy with QB 288 V1 2.48 µmol/J , 167.3Lm/W

LED Gardener Review

No Thermal Interface Material is required between the LED board and the heatsink.

Remove black plug on driver and use Philips head screw driver for dimming

260W QB V2 LED Kit

Free shipping within US

$299.00 $399.00

Ready to assemble 260W LED V2 Board kit

260 Watt Lamp Kit. High Efficiency QB288 V2 powered with Samsung top bin Diodes. Suited for main light and supplement lighting.

QB288 V2- 288pcs Samsung 301B

Includes

• 2x QB288 Boards made by Samsung with 301B LED
• 1x Slate 2 Double Predrilled 600mm Heatsink
• Meanwell HLG-240H LED Driver. 93.5% Driver Efficiency. Boards should be wired in series with the driver for maximum output
• 6FT Nema 5-15P 16/3 SJTW NA Power Cord or equivalent for standard 120VAC with cable connector
• 2ft solid core Wire, 2x Wago Connectors for DC wiring
• Hanger Clips

Lamp Efficacy with QB 288 V2  2.47 µmol/J , 170Lm/W
Board Level Efficacy with QB 288 V2 2.63 µmol/J , 181Lm/W

LED Gardener Review

No Thermal Interface Material is required between the LED board and the heatsink

Remove black plug on driver and use Philips head screw driver for dimming

NOTE: Boards should be wired in series with the driver for maximum output

600W QB288 V2 R spec LED Kit

Horticulture Lighting Group

Sold Out $899.00

HLG 600W LED kit has a output equivalent of 1000W DE HPS. 600W Kit is powered with our custom designed high efficiency QB288 V2 R spec Quantum Board. Dimensions 740mm x 395mm

Includes

•  4x QB288 V2 R spec Quantum Board
•  Anodized Slate 5 Aluminum Extrusion
•  Inventronics EUD-600 Driver
•  Hanger, Power Cord, Wires, Wagos, M3 Screws

Top Features

•  Reliable Passive Cooled Design
•  Full Spectrum for better results
•  Ideal for Veg and Bloom
• 1 Year Warranty

Specifications

This product does not include any manual. Please buy HLG 550 if you are not sure.

50 K ohm Potentiomter(not included) can be wired across Dim + and Dim - for manual dimming.

NOTE:

No dimming included.

Boards should be wired in series with the driver for maximum output

320W XL QB V2 R spec LED Kit

Free shipping within US

$485.00

320W LED V2 R spec XL kit

320 Watt Lamp Kit. High Efficiency QB288 V2 R spec with Samsung top bin Diodes. Suited for main light and supplement lighting. 3 ft long heatsink for a wider spread.

Length:891mm, Width:205mm

Includes

• 3x QB288 V2 R spec
• 1x Slate 2 Triple Predrilled 891mm Heatsink
• Meanwell HLG-320H LED Driver. 93.5% Driver Efficiency. Boards should be wired in series with the driver for maximum output
• 6FT Nema 5-15P 16/3 SJTW NA Power Cord or equivalent for standard 120VAC with cable connector
• 2ft solid core Wire, 2x Wago Connectors for DC wiring
• Hanger Clips

Lamp Efficacy with QB 288 V2  2.63 µmol/J
Board Level Efficacy with QB 288 V2 2.75 µmol/J

No Thermal Interface Material is required between the LED board and the heatsink

Remove black plug on driver and use Philips head screw driver for dimming

NOTE: Boards should be wired in series with the driver for maximum output

260W XL QB V2 Rspec LED Kit

Free shipping within US

$369.00

260W LED V2 Rspec Board XL kit

260 Watt Lamp Kit. High Efficiency QB288 V2 Rspec. Suited for main light and supplement lighting. 3 ft long heatsink for a wider spread

Length:891mm, Width:205mm

Includes

• 2x QB288 V2 Rspec Boards
• 1x Slate 2 Triple Predrilled 891mm Heatsink
• Meanwell HLG-240H LED Driver. 93.5% Driver Efficiency. Boards should be wired in series with the driver for maximum output
• 6FT Nema 5-15P 16/3 SJTW NA Power Cord or equivalent for standard 120VAC with cable connector
• 2ft solid core Wire, 2x Wago Connectors for DC wiring
• Hanger Clips

Lamp Efficacy with QB 288 V2  2.6 µmol/J
Board Level Efficacy with QB 288 V2 2.73 µmol/J

Datasheet of Samsung LM301B Datasheet used in R spec Quantum Board ®

LED Gardener Review

No Thermal Interface Material is required between the LED board and the heatsink

Remove black plug on driver and use Philips head screw driver for dimming

NOTE: Boards should be wired in series with the driver for maximum output

Slate 2

Slate 2 Heatsinks for QB

$29.00

Predrilled Heatsink for Quantum Boards

Save on heatsinks. Purchase Heatsinks + Boards Combos

Slate 2 series is ideal for low cost high power QB 304 and QB 288 cooling applications.

Single

•   Pre Drilled for 1x QB304 or 1x QB288 Quantum Board
•   Black Anodized
•   Length:340mm Width:205mm Weight:0.73kg
•   M3 Screws to mount board included
•   100W - 150 Watts

Double

•   Pre Drilled for 2x QB304 or 2x QB288 Quantum Board
•   Black Anodized
•   Length:600mm Width:205mm Weight:1.5kg
•   M3 Screws to mount board included
•   100W - 260 Watts

Triple

•   Pre Drilled for 3x QB304 or 3x QB288 Quantum Board
•   Black Anodized
•   Length:891mm Width:205mm Weight:2kg
•   M3 Screws to mount board included 
•   100W - 325 Watts